CCNA certification is an associate level. Cisco Career certification CCNA certification validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched. Networks, including implementation and verification of connections to remote sites in a WAN.
In 2013, Cisco announced an update to its certification program. There are now several different types of Cisco-Certified Network Associate, with the original CCNA certification being re-designated as “CCNA Routing and Switching.”
The content of the exams is CISCO proprietary. To achieve CCNA Routing and Switching certification, one must earn a passing score on Cisco exam 200-120, or combined passing scores on both the “Interconnecting Cisco Network Devices” ICND1 #100-101 and ICND2 #200-101 exams. Passing scores are set by using statistical analysis and are subject to change. At the completion of the exam, candidates receive a score report along with a score breakout by exam section and the passing score for the given exam. Cisco does not publish exam passing scores because exam questions and passing scores are subject to change without notice.
The 200-120 CCNA is the composite exam associated with the Cisco Certified Network Associate Routing & Switching certification. This exam tests a candidate’s knowledge and skills required to install, operate, and troubleshoot a small to medium size enterprise branch network. The topics include connecting to a WAN; implementing network security; network types; network media; routing and switching fundamentals; the TCP/IP and OSI models; IP addressing; WAN technologies; operating and configuring IOS devices; extending switched networks with VLANs; determining IP routes; managing IP traffic with access lists; establishing point-to-point connections; and establishing Frame Relay connections.
Prerequisite for CCNA Routing & switching Track
There is no any prerequisite for CCNA Routing & Switching Certification. Cisco R & S track fulfill the all necessary needs to understand computer networks and their communications. If a candidate make his career in like: Security, Voice, Wire-less, in these certification CCNA R & S is a pre requirement
Note:- If a candidate crack ICND-1 exam then he get a certificate of CCENT Certification.
Duration:- 90 Minute
Passing Criteria:- Above 85% Score in Exam .
If you are an IT professional or network engineer, you might be missing out on a great way to enhance your career profile. The IT job market is getting more crowded every day. One of the best ways to set you apart in the crowded IT job market is with a Cisco Certified Network Associate (CCNA) Certification.
Do you really need CCNA certification?
Lets say you are applying for a job in a new organization. You might have incredible IT skills, but how do you show this in a job application or interview. The people that do the hiring need to make decisions based on limited information. If they see official CCNA certification, they can be assured that you have achieved a certain level of competence. Otherwise, they have to take a chance. Plus, if there are two candidates for a job that have pretty much the same amount of experience, the one who has certification will be prefer.
What if I already have a job?
Now if you are already employed, you probably have the desire to move up to a higher-paying position. The higher-level jobs are low in supply and high in demand. The same principle applies here. You are competing against others, and the deciding factor might be whether or not you have CCNA certification.The CCNA makes you a solid, well-rounded
network engineer. Completing the certification process not only gives you a certificate, it trains you in multiple levels and areas regarding the ability to work with routed and switched networks.
Declare your proven ability to install, monitor, and troubleshoot networks by earning Cisco Certified Network Associate (CCNA) Routing and Switching certification. With a focus on network infrastructure, CCNA Routing and Switching also covers wireless access, security, and connectivity to branch offices using WAN. It confirms your ability to work with IP, EIGRP, Serial Line Interface Protocol, Frame Relay, VLANs, OSPF, Ethernet, and access control lists. It also validates your ability to manage Cisco devices with IOS v15, handle Cisco licensing, and perform extensive troubleshooting. Our CCNA Routing and switching training includes enhanced content that exceeds standard authorized Cisco content, expanded lab equipment, and an unrivaled guarantee for CCNA certification success
Duration: 45 days (2 hour per day)
- Basic Networking and different topologies of Network
- IP Addressing and Subneting
- OSI Model And TCP/IP Model
- Router and Switch Introduction and their Working
- LAN Switching Technology
- Ethernet Standards (IEEE-802.3)
- Types Of Cables and Connectors(Twisted Pair Cable, Fiber Cables, Serial Cables)
- CISCO IOS Introduction
- Hardware components of a CISCO Device
- Accessing of a CISCO device via
- Different Modes in Configuration of a CISCO Device
- Administrative Configuration and Basic Configuration via CLI Mode and GUI
- IP Routing Basic
- Routed and Routing Protocols and Differences
- Configuration of Static Routes, Default Routes
- Routing Protocols
- Introduction Of a CISCO Switch
- Basic Configurations on a CISCO Switch
- Description and Configuration of Port-Security
- Introduction of VLAN,s
- Redundancy in CISCO Switches and STP Protocol
- FHRP, VRRP, HSRP, GLBP configuration
- Cisco Device management
- IP Filtering via ACCESS Control List
- Network Address Translations
- Introduction of Different WAN technologies
- Configure and Verify a PPP Connection b/w CISCO Routers
- Configure and Verify Frame Relay On CISCO Routers
- Implement and Troubleshoot PPPoE
- IP-V-6 Description
- Configuration of IP-V-6 on CISCO Routers
- Implementation of OSPF-V-3,EIGRP in IP-V-6
For further details go through the link below :